Antimicrobial + Fluid Resistant Cloth Mask
Antimicrobial + Fluid Resistant Cloth Mask
*Ships next business day.
In an effort to meet demand, there might be slight variations in size.
|Bendable Nose Wire||Water Resistant|
|Adjustable Earloops||100% Cotton Lined|
|Machine Washable||Replaceable Inserts|
- Exterior fabric is 75% Polyester/ 19% Viscose/ 6% Spandex. We use the same soft Spill Resistant & Anti Microbial fabric as our scrubs.
- Interior fabric is lined with 100% Cotton.
- Adjustable nose wire prevents fogging of glasses.
- Soft adjustable ear loops.
- Includes 3 replaceable PM2.5 Filter Inserts for free :)
- Made in India; Ships from Huntsville, AL.
- Mandala masks are non-medical masks and are not devices intended for use in the diagnosis of a disease or other conditions or in the cure, mitigation, treatment, or prevention of disease.
- For Pleated version click here
- Adults - 9" Wide x 6" Height (masks may vary 0.3" - 0.9")
- Kids - 7" Wide x 5" Height (masks may vary by 0.3" - 0.9")
- Pleated Adult Mask - 8" Wide x 4" Height (masks may vary by 0.3" - 0.9")
- Pleated Kids Mask - 6.5" Wide x 3" Height (masks may vary by 0.3" - 0.5")
- Adjustable nose wire
- Adjustable soft loops
- Filter pocket
- Remove filter before washing
- Custom made in India
Exterior Fabric - We took over 4 years to develop our proprietary fabric Equa-Tek® that repels most liquids while inhibiting bacterial growth and is super stretchy.
|75% Polyester/ 19% Viscose/ 6% Spandex|
|Machine Wash Cold||Do Not Bleach|
|Tumble Dry Low||Iron Low Heat|
Interior Fabric - The inner layer is lined with 100% cotton fabric.
Mandala masks are not a replacement for medical grade masks and have not been certified by the FDA, CDC or NIOSH.
Mandala face masks are not intended for use as surgical masks. Do not use Mandala face masks in a clinical setting where the infection risk level through inhalation exposure is high. Please continue to follow your workplace/institutional standards and governmental guidelines and orders regarding face mask use and other precautions during the COVID-19 pandemic.
Antimicrobial coatings do not protect against COVID-19 and these masks are not intended to provide antimicrobial protection nor have they been tested or certified to prevent or reduce particulate filtration.
Mandala assumes no responsibility or liability whatsoever for the use of these masks for purposes for which they have not been approved or certified, nor does it assume any responsibility or liability in connection with the improper use of the masks.
Under no circumstances are these masks appropriate for use by COVID-19 infected patients, nor by any healthcare providers treating or attending to suspected or confirmed patient cases of COVID-19.
Mandala hereby disclaims all warranties with respect to the masks, whether statutory, express, or implied, including, but not limited to, the implied warranties of merchantability, non-infringement, and fitness for a particular purpose.
Our masks are made in India at the same factory that we have been using for years to produce our medical scrubs. The masks are shipped via Fedex or USPS from our warehouse in Huntsville, AL :) Once shipped, it takes anywhere from 2-5 business days to receive your order.
So this is where we will go on a rant. We have seen a lot of companies market thin 100% cotton masks that are very "breathable". Let's keep in mind why we are all wearing masks to begin with - it is to filter out particulates and keep us, our loved ones and the community around us safe.
Being a medical scrubs brand at heart, we design products for the healthcare community. The outer layer in our masks is constructed from the same fabric we use in our scrubs, a proprietary 200 GSM Poly/Viscose/Spandex fabric. This fabric is water resistant which helps keep droplets (sneezes) out. It is also treated with antimicrobial, which essentially prevents the growth of bacteria, mold & mildew that may cause unpleasant odors, discoloration or deterioration of the fabric.
The inner layer is constructed from a 200gsm 100% cotton fabric. We include 3 replaceable PM2.5 Filters made from melt-blown polypropylene offering 95% Bacterial Filtration Efficiency (BFE) and 95% Particulate Filtration Efficiency (PFE) measurement at 0.1 microns.
So anytime you are wearing a mask that filters out >95% of particulates, it will take some getting used to :)
FYI - below is the recommended mask construction as recommended by the WHO. Our masks meet every single one of them. So whether you decided to buy our masks or not, simply do us a favor and WEAR A MASK! :)
A regular metal wire would corrode in repeated washes so we decided to use a commercial grade aluminum wire encased in a plastic covering. We also cover the corners of the wire with medical tape so the edges of the wire don't tear through the fabric :)
The bendable nose wire can be used to help seal the mask thus eliminating air traveling upwards and fogging your glasses.
Each mask comes with 3 replaceable PM2.5 Filters offering 95% BFE (Bacterial Filtration Efficiency). The BFE>95% filter is made of melt-blown polypropylene and thus is not washable as the meltblown fabric loses its effectiveness even after one wash. We recommend changing them out once every 3-4 days or whenever you feel it's tougher to draw a breath.
While the masks are machine washable, we always recommend handwashing and air drying any garment as it increases the longevity. This way you don't have to come back and spend more money on masks as machines are rougher on garments than hand washing. We recommend washing them on cold.
As mentioned above, the filters are not washable as the meltblown fabric loses its effectiveness even after one wash. We recommend changing them out once every 3-4 days or whenever you feel it's tougher to draw a breath.
Yes! We offer pre built 5 mask variety packs OR you can simply select 5 individual masks, there is no difference in price :) If ordering one of the variety packs, please make sure the default packs option is set to "Single" as the 5 mask variety pack is already setup as 5 masks.
We charge $3.50 total for between 1-4 masks. Why is shipping not free? It's because we use a shipping partner and warehouses charge what's called a pick and pack fee. The more skus (items), higher the fee they charge us as workers need to walk to different areas to pick up different colors. The shipping fee we pay to the warehouse is much higher than $3.50 but we cut into our margins and cover the difference. Shipping is never really "free", it's always built into the price you pay :)